Everyone should update their operating system, but a few glitches might spoil your experience. Error 0x80240034 is one of the most common errors encountered while updating the Windows 10 operating system, which further impedes and prevents the updating process.
Although Microsoft stated that this mistake has been resolved on their end, a large number of Windows 10 users continue to experience this issue when updating their operating system.
This problem has been observed in a few circumstances to affect not only Windows 10 insiders, but all previous versions as well.
According to customers, available updates may be readily downloaded using the automatic Windows update service, but when the installation procedure reaches the finish, the system restarts on its own, and all changed settings return to normal.
How to Fix Error 0x80240034 in Windows Update
The message “0x80240034” or “Update failed to download” is generally displayed when this error occurs. This error causes the system to slow down even further, and it fails to respond quickly to the input. So, if you’re looking for ways to cure the error 0x80240034, try the procedures listed below:
Method 1: Run the Troubleshooter for Updates.
The “Windows Update troubleshooter” is a built-in utility that comes with every Windows 10 computer and is used to resolve any errors that arise during Windows update. To fix the error 0x80240034, follow these steps.
Step 1: Go to the bottom left of the page and type settings into the search field. You may also launch settings by pressing and holding the WIN+ I key.
Step 2: Locate and select Update and Security from the drop-down menu.
Step 3: Locate the option troubleshoot on the left-hand side and select it.
Step 4: Select Windows Update from the drop-down menu.
Step 5: EI7SYHNext, go to the right bottom of the page and select Run the Troubleshooter.
Step 6: To finish this process, follow all of the on-screen prompts.
Step 7: Restart your computer and see if the error has been resolved.
Method 2: Use the SFC command to scan the system file.
The presence of damaged and corrupted system files is one of the most prevalent causes of Windows 10 problem 0x80240034. In order to fix the problem, run the SFC (system file checker) command to search the system files. To use the SFC command, follow these steps:
Step 1: Hold down the Win + Q keys while typing cmd into the search bar.
Step 2: Right-click on the command prompt option in the search results.
Step 3: Right-clicking in the previous step will open a drop-down menu; from there, select the option to execute as administrator.
Step 4: When the User Account Control dialogue box displays, select Yes.
Step 5: Type sfc /scannow in the spot where the cursor is blinking, and then press enter.
Step 6: After the scanning and repair are completed, restart your computer to see if the problem has been addressed.
Method 3: Conduct a DISM scan
The DISM utility is similar to the System file checker command in terms of functionality. Some corrupt system files stay unmodified or unresolved after running the SFC command, causing the error to persist. So a DISM (Deployment Image Servicing and Management) scan is run to delete and restore such unresolved system files. Follow the steps below to execute a DISM scan:
Step 1: Press and hold the WIN + R keys until a run prompt displays.
Step 2: To open a command prompt, type cmd in the run dialogue box ( admin)
Step 3: When the User Account Control dialogue box displays, select Yes.
Step 4. Type dism.exe /Online /Cleanup-image /Restorehealth in the spot where the cursor is flashing or where the command line is.
Step 5: After that, restart your computer to see whether the error still exists.
It is possible that DSIM will be unable to access or download online files at times. In such instances, you can use your own installation USB or DVD. To ensure that the repair source is swapped out for our own.
Insert the following media and type the following command: /Online /Cleanup-Image /RestoreHealth /Source:C:/Repair/Source/Windows /LimitAccess dism.exe /Online /Cleanup-Image /RestoreHealth /Source:C:/Repair/Source/Windows /LimitAccess
Make sure the path to the inserted DVD or USB is replaced with C:/Repair/Source/Windows.
Method 4: Manually download the pending updates
The primary way for resolving the error 0x80240034 is to obtain and install the relevant updates. Though you’ll need update codes before continuing, every Windows update code starts with a kB and is then followed by a series of numbers. So, after you’ve got your hands on the revised code, you may go ahead and manually download and install the update. Take the following steps:
Step 1: Open your browser and go to the ‘Microsoft update catalogue’ website.
Step 2: In the search box, type the KB number or update code you received, and then hit the enter key.
Step 3: A catalogue or index of similar updates will then emerge. Find one that fits your system’s architecture or configuration.
Step 4: Find the update you want and click the download icon next to it.
Step 5: Run the setup file to install the most recent version of your operating system, then follow the on-screen prompts to finish the procedure.
Step 6: Restart your computer and check if the error has been resolved.
Method 5: Clear the Windows Update Cache/Distribution Folder
Occasionally, unnecessary cache is stored in the “Windows software distribution folder,” resulting in the 0x80240034 issue. As a result, such unnecessary files must be deleted and removed in such circumstances. And after these files have been erased, users must re-download them again on their own.
Follow these methods to get rid of any superfluous files:
Step 1: Hold down the Win + Q keys while typing cmd into the search bar.
Step 2: Right-click on the command prompt option in the presented search results.
Step 3: Right-clicking in the previous step will bring up a drop-down menu, from which you can select the option to run as administrator.
Step 4: When the User Account Control dialogue box displays, select Yes.
Step 5: After that, run these codes one by one, pressing enter after each one. –
1) wuauserv net halt
2) SoftwareDistribution /S /Q rmdir percent windir percent
3) wuauserv wuauserv wuauserv wuauserv wu
Step 6: After that, close all open applications and apply the “waiting updates.”
Check to see if the error has been addressed.
Method 6: Reset the Updates Components
Some of the updated components can get disturbed or corrupted, resulting in the error 0x80240034. As a result, resetting Windows update components is a more complicated but still quite effective method of resolving this issue. To reset the updated components, follow these instructions.
Step 1: First, press Windows + R to open the Run dialogue box.
Step 2: In the run prompt, type cmd and then click OK.
Step 3: To run the command prompt as an administrator, press Ctrl + Shift + Enter.
Step 4: When the User Account Control dialogue box displays, select Yes.
Step 5: Now, on the command prompt, type these codes one at a time, pressing enter after each one –
1) wuauserv net halt
2) cryptSvc should be stopped on the network.
3) Stop bits for the internet
4) msiserver net stop
5) SoftwareDistribution /S /Q rmdir percent windir percent
6) wuauserv net start
7) start cryptSvc with net
8) Start bits for the net
9) msiserver net start
Step 6: Restart your computer and check if the error has been resolved.
Method 7: Using an ISO File to Update Windows
If the error persists, updating Windows via an ISO file may be the only way to resolve the problem. This strategy necessitates using the Windows update client to download or install the pending updates. So, here are the measures to take:
Step 1: Open your browser and go to Microsoft’s official website, then click the “update now” option that displays.
Step 2: Next, double-click the ISO setup file that you recently downloaded.
Step 3: When the User Account Control dialogue box displays, select Yes.
Step 4. From the “Windows 10 Update Assistant wizard,” pick the “update now” button once more.
Step 5: After you click next, the system will begin to scan.
Step 6: After the scanning is completed, the operating system will begin updating.
Step 7: The update procedure is now complete. Follow the on-screen directions to finish the process.
Step 8: Restart your computer, and you should notice that the error 0x80240034 is no longer there.
Conclusion
Although it is vital to update your operating system in order to have a functional system, a few faults may pose an issue for you. The most common error that occurs while updating the Windows 10 operating system is Error 0x80240034, which further impedes and ends the updating process. Such faults may necessitate a few more difficult settings and inputs, but they are successful in resolving the problem. So, the procedures listed above are simple and effective for resolving the Windows error 0x80240034. I hope you find these ways to be really beneficial.
