Usually, whenever we talk about 10.0.0.138, the first thing that strikes our mind is router. Therefore, let’s start by understanding what router is and how it works. Firstly, router is termed as the backbone of the internet. Also, it connects two or more networks. Moreover, it facilitates forwarding of packet between the networks. In general, router helps in making multiple network connections. But at the same time, they should be associated with different IP networks. For instance, the owners cable, or, even DSL router for that matter. Moving further, the Internet Service Provider (ISP) connects this to the internet. In addition, there are circumstances when multiple routers are used in interconnected networks. At this time, they exchange information. Further, the exchange is concerned with the destination address. Now, this is possible due to routing protocol.
Now, let’s understand our area of concern. That is, IP address, which is also termed as Internet Protocol Address. Nonetheless, each and every device uses the IP address for communication. However, note that every IP address is unique. Although, full stops separate the IP address. Also, IP addresses is made of only the numbers. Therefore, it doesn’t include any sort of letter or alphabet. Mostly, the default IP address of many routers is is 10.0.0.138. Furthermore, it is a private IPv4 router gateway.
What is 10.0.0.138?
Since our article deals with “how to login 10.0.0.138”, it is crucial to first understand what it is. Generally, 192.168.0.1 is called as a private address. Furthermore, the Internet Assigned Numbers Authority defined it. Although, you can use the IP address either on an individual machine or on a local network. Also, it is for performing special tasks. Usually, it is commonly the default IP address for various routers. Not only this, but 192.168.2.1 and 192.168.1.1 can also be uses as the default IP addresses. Sometimes, there are some other IP addresses which can be used instead of 10.0.0.138. For instance, 192.168.254.254 or 1192.168.0.1. Moreover, an end user gets the connection to the network router through these IP addresses.
Features of 10.0.0.138 Default IP Address
Honestly, no topic is complete without its features. Therefore, it’s time to have a glance at the features.
- The users get the access to same IP address. But at the same time, they have to be from different networks. Therefore, the usage by different networks acts as an advantage.
- Also, you do not need separate DHCP servers. Thereafter, you do not need any additional stitches to complete all the tasks.
- Thereafter, the flow of information will be easy and smooth. Because, it plays the role of a highway. Further, it processes the traffic to various destinations.
How to Login 192.168.0.1 Admin
Now, when we’ve covered every possible subheads of the topic, let’s now learn the login process. Though, you need to follow some steps. Also, these are given below.
Step 1: Starting with, you’ve to open your web browser. Next, type http://192.168.0.1/
Step 2: Thereafter, you will be getting the admin page of the router. Now, you’ve to enter the username and password in the login panel.
Step 3: At last, you’re hard work gets the success. Therefore, you may check the login credentials from the standard list. Also, you get the access to reset the same.
How to find your Router’s IP Address?
Usually, you can find your router’s IP address in the manufacturer’s documentation. Even the various models which are from the same manufacturer, have the same IP address. Moreover, if you don’t know the number, then you can check the router’s settings.
Further, in case of Linksys router, the following is the way to find the IP address.
Setup> Basic Setup window.
Thereafter, for Netgear router, the IP address is in
Maintenance> Router setup page.
To continue with, let’s have a look at some of the popular brands and their IP addresses.
Routers IP ADDRESS
Cisco 192.168.10.2, 192.168.1.254
NETGEAR and D-Link routers 192.168.0.1
Belkin and SMC routers 192.168.2.1
However, in case the hard work you put in doesn’t show up the result, then the probability is that this is not the gateway. Therefore, follow the below steps to get the correct gateway. Step 1: Initially, open your command prompt. Further, you would get the same by pressing the Windows icon key + R.
Step 2: Now, enter cmd in the run box.
Step 3: Thereafter, enter ipconfig in the command window. Next, press Enter.
Step 4: Finally, the IPv4 address, DNS server as well as the Gateway will be visible.
Therefore, you can now login successfully.
How to Change Your Router’s IP Address?
Now, to change the IP address, the numbers are just not sufficient! Yes, you need a good mathematical base for the same. Furthermore, the manufacturer of the factory sets the IP address. Although, you can definitely change it due to the administrative console of the network.
However, it may happen that other device also has the same IP address which is associated with your network. Therefore, in such cases, you may face an address conflict. Therefore, you need to change the IP address. Moreover, this has to done to prevent any address conflicts. Further, you can change the IP address to a comparable IPv4 address. Also, this is done to ensure that only one device works with 10.0.0.138. At the same time, address conflicts are avoided.
How to change or reset the password?
Afterwards, if you’re unable to remember your username and password, then you are just a few steps away from changing or resetting your password.
Before proceeding, let’s look at some of the default username and password of the modems.
Router IP address Username Password
Netgear http://192.168.0.1 Admin Password
Linksys http://192.168.1.1 Admin Admin
However, if the default credentials still do not work, then the best way is to reset it. Further, there is a hidden button in modern modems. Moreover, this button resets the properties to the default factory settings.
Therefore, you need to press the button for almost 10-15 seconds. Thereafter, due to this, it will reset your device to the factory settings. Now, you may log in to the router settings with the default username and password.
Therefore, by following all the steps mentioned in the article, you will be able to fight with all the problem that come your way. They may no longer be able to obstruct your path.
Thank you for reading the article. I hope it provided you with the solutions.